Arc OK not working

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Arc OK not working

Postby b57378 » Tue Jul 05, 2022 9:04 am

Hi all hope everyone is doing great.

Would appreciate some insight on a problem I'm having.

My arc OK signal coming from the plasma inverter is working as expected - when torch fires, arc OK signal is on and when torch off, the arc OK signal is off.

For some reason the motion is not stopped if the torch is abruptly turned off? Am I missing something here?

Thank you in advance.
b57378
 
Posts: 37
Joined: Wed Oct 14, 2020 9:03 pm

Re: Arc OK not working

Postby cncdrive » Tue Jul 05, 2022 5:48 pm

There is a checkbox settings for that with which you can make the controller to wait or to not wait for the arc ok signal.
cncdrive
Site Admin
 
Posts: 4252
Joined: Tue Aug 12, 2014 11:17 pm

Re: Arc OK not working

Postby b57378 » Wed Jul 06, 2022 5:58 am

Thank you for the prompt response, I'm assuming that would be in the IO Setup tab but I don't see it? Only the arc OK input settings and Thc functions
b57378
 
Posts: 37
Joined: Wed Oct 14, 2020 9:03 pm


Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 1 guest