Modbus TCP Remote DRO

Here is where you can drop off Examples of WORKING macros,plugins,Gcode programs , macro Wizards etc.
Please give a brief description of what it is and how it works.

Re: Modbus TCP Remote DRO

Postby CADdy » Wed Aug 12, 2020 5:54 pm

Hi all,

can someone explain to me how this EXE is compiled? I want to make some changes, but I don't know how to rebuild the EXE.
With the second improved version the M300 macro does not run. It only gives error messages (UCCNC 1.2113). nm156 was last online in February.
It would be very nice if someone could give me some tips.

Best Regards
Peter
CADdy
 
Posts: 35
Joined: Sun Sep 17, 2017 2:26 pm

Re: Modbus TCP Remote DRO

Postby dezsoe » Wed Aug 12, 2020 9:30 pm

Hi Peter,

I've just downloaded the 2nd version and it works fine. There's no problem with the M300. Extract the whole folder from the zip to your projects folder and open the project. First compile the project without opening anything. It will compile and then you can open the MainForm and make changes.
dezsoe
 
Posts: 1186
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Modbus TCP Remote DRO

Postby CADdy » Thu Aug 13, 2020 6:40 am

Hi dezsoe,

I have unpacked the zip into a new empty directory and then copied the M300 macro to the other macros. The first version of the Remote DRO of nm156 works fine this way.

First compile the project without opening anything.


How is it compiled? Pardon my question, but which program do I need?

I try it again after work at home. Thanks for your answer.

Best Regards
Peter
CADdy
 
Posts: 35
Joined: Sun Sep 17, 2017 2:26 pm

Re: Modbus TCP Remote DRO

Postby dezsoe » Thu Aug 13, 2020 7:03 am

Hi Peter,

I have Visual Studio 2010 Express.
dezsoe
 
Posts: 1186
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Modbus TCP Remote DRO

Postby CADdy » Thu Aug 13, 2020 8:52 am

Hi dezsoe,

ah ok, thanks for info. I'll download it and test it.

Best Regards
Peter
CADdy
 
Posts: 35
Joined: Sun Sep 17, 2017 2:26 pm

Re: Modbus TCP Remote DRO

Postby CADdy » Fri Aug 14, 2020 6:35 pm

Hi dezsoe,

perfect, it works just like I thought it would. I made some cosmetic changes with Visual Studio 2010 Express and adapted it to my milling machine. I am very satisfied, thank you very much for your help.

Best Regards
Peter
CADdy
 
Posts: 35
Joined: Sun Sep 17, 2017 2:26 pm

Previous

Return to UCCNC TOOL BOX

Who is online

Users browsing this forum: No registered users and 2 guests