Macro for probing inside center of distance

Here is where you can drop off Examples of WORKING macros,plugins,Gcode programs , macro Wizards etc.
Please give a brief description of what it is and how it works.

Re: Macro for probing inside center of distance

Postby gabi68 » Wed Dec 07, 2016 10:56 pm

Hi Terry,

This is very useful macro. I have 1.2026 ver and I not seeing any messages besides the completed (center of X Y completed). How is this supposed to work? I see there is G31 call. I have a macro for Z probe. Can I use the probe device for this task also?
What I mean with that is to put the auto Z plate to the side of the stock and probe.
If that is not working can you point me in the right direction?
Also can you post a finished version of what you have regarding this macro.

Many thanks in advance.
Gabi
gabi68
 
Posts: 12
Joined: Wed Dec 07, 2016 10:35 pm

Re: Macro for probing inside center of distance

Postby gabi68 » Sat Dec 10, 2016 12:19 pm

Hi Terry,

I dload the macro and use it. First no messages, only finished message. I have some questions:
- how is this supposed to work? I have a z plate and thinking to use that for finding centre of a stock.
- can you post the finished version, please?

Many thanks
Gabi
gabi68
 
Posts: 12
Joined: Wed Dec 07, 2016 10:35 pm

Previous

Return to UCCNC TOOL BOX

Who is online

Users browsing this forum: No registered users and 1 guest