lubrication plugin
Posted: Sat Feb 15, 2025 6:22 amhello
i just installed the lubrication plugin,
pin:3 port:3 with a temp of 6s and a cut of 1s
i activated in the menu spindel M8 on pin:3 port:3
by doing my tests without load, I realized that led 53
closes well but that the opening was not clear the led of the ssr and diagnostic flashes very quickly
do we have to apply a load (solenoid valve) obligatorily on the relay (ssr)?
++
gilles
i just installed the lubrication plugin,
pin:3 port:3 with a temp of 6s and a cut of 1s
i activated in the menu spindel M8 on pin:3 port:3
by doing my tests without load, I realized that led 53
closes well but that the opening was not clear the led of the ssr and diagnostic flashes very quickly
do we have to apply a load (solenoid valve) obligatorily on the relay (ssr)?
++
gilles