Page 18 of 18

Re: MODBUSEZ Plugin

PostPosted: Sat May 04, 2019 4:02 pm
by trendsetter
Dear all,

I have the following Inverter:
DZB312B003.7L2DK
manual is here:
https://www.manualslib.com/manual/82887 ... tml#manual

I am quite clear about setting the control of the VFD to Modbus and I have a standard USB-RS454 adapter.
It seems that there is some communication possible, since the display is changing with Modbusez plugin used with UCCNC but I cannot get the spindle running. The Spindle is still in Stop mode and I donĀ“t have any chance to change it. Any tipps from the expert how to execly configurate the plugin for this Invertere?

Standard Analog digital control works perfectly, but I need more I/O therefore I want to change to modbus.

BR
Michael

Re: MODBUSEZ Plugin

PostPosted: Mon Sep 09, 2019 8:16 pm
by Paklic
Hi,
I bought a VFD ecogoo 9100-1t-00150gb.
Manual I found here: https://pan.baidu.com/s/1hsw6eYo
I found how to set rs485 that's ok, but I don't know how to turn on rs485.
Does anyone know how?
Thanks...
sorry my english is not good.

Re: MODBUSEZ Plugin

PostPosted: Thu Sep 12, 2019 10:06 pm
by Dan911
Paklic go to page 1 of this thread and read how Battwell got his Ecogoo VFD working,

Re: MODBUSEZ Plugin

PostPosted: Fri Sep 13, 2019 10:28 am
by Paklic
Dan911 wrote:Paklic go to page 1 of this thread and read how Battwell got his Ecogoo VFD working,


but my problem is different, i can't enable rs485 is not comunication.

I have set up for rs485:
P9.00 is the local address / 1
P9.01 is baud rate - 9600/3
P9.02 is N81for RTU / 0
this setting is ok.
I don't need hex command
How to enable rs485 + and rs485-?
I can't do it from the read manual.

I got hex commands to be useful
[at
9100 RS485.docx
hex command
(19.21 KiB) Downloaded 82 times


manual:
tachment=1]9100 User manual.rar[/attachment]

Re: MODBUSEZ Plugin

PostPosted: Fri Sep 13, 2019 10:42 am
by Paklic
connected via modbus poll
Modbus not connection