WHB04B-4 Pendant Plugin

This is where you talk about Plugins. How they are made and how they work, show examples.

Re: WHB04B-4 Pendant Plugin

Postby brandonwong » Wed Jul 22, 2020 6:36 pm

Thank you so much for this.

I’m using a newly purchased wireless 6-axis and couldn’t get it to work on the stock plugin.
I gave up and while having supper found this thread. I fired up in demo mode and reconnected the pendant and I’m off to lalaland!!!

Yippie yay!

Brandon
brandonwong
 
Posts: 1
Joined: Wed Jul 22, 2020 6:33 pm

Re: WHB04B-4 Pendant Plugin

Postby joey81 » Wed Sep 09, 2020 5:39 am

My WHB04B-6 arrived an hour ago.

It works!

Still learning the ropes, but the plugin is functional enough for my work.

Thank you so much, Shad!
joey81
 
Posts: 5
Joined: Thu Aug 06, 2020 12:46 pm

Re: WHB04B-4 Pendant Plugin

Postby trikkas.a » Sat Sep 19, 2020 7:44 pm

Hello, I'm thinkink to buy this jog. What keys dont work with the last plugin. Thank you
trikkas.a
 
Posts: 1
Joined: Sat Sep 19, 2020 7:42 pm

Re: WHB04B-4 Pendant Plugin

Postby pmorton » Fri Oct 16, 2020 6:48 pm

I am new to this forum, so please excuse me if I am repeating others' questions.
I downloaded and put the .dll into the UCCNC folder but the software doesn't seem to be picking it.
I keep getting the "Receiver Not Connected" message
any help would be helpful.
I am using UCCNC 1.2049 (so it's not the latest) with UC300eth board. I was using the UCR201 but that won't connect either
it is quite possible I am doing something stupid as I am still somewhat new to the CNC world.
thanks
Paul
pmorton
 
Posts: 1
Joined: Fri Oct 16, 2020 6:19 pm

Re: WHB04B-4 Pendant Plugin

Postby asuratman » Mon Oct 19, 2020 4:59 am

Do you guys think It is better to purchase 6 axis pendant than 4 axis one since 6 axis work for all ?
asuratman
 
Posts: 87
Joined: Sun Jan 28, 2018 1:50 pm

Re: WHB04B-4 Pendant Plugin

Postby thegreatwaldo » Mon Oct 19, 2020 7:07 am

Paul
Try plugging the transmitter into another usb port and maybe using the the current official release version or the latest test version.
Cheers
Andrew
thegreatwaldo
 
Posts: 138
Joined: Tue Sep 06, 2016 8:28 pm

Re: WHB04B-4 Pendant Plugin

Postby Delco » Mon Oct 19, 2020 8:31 am

Is it possible to get the macro buttons and function buttons working on the plugin ?
Delco
 
Posts: 113
Joined: Tue Apr 02, 2019 4:23 am

Re: WHB04B-4 Pendant Plugin

Postby shad » Tue Oct 20, 2020 5:16 pm

Hello!
There are 10 buttons for UCCNC functions and macro.
Try to check connection of the receiver.
Plugin must be copied to the Plugins folder and enabled in the "plugins" settings of the UCCNC.
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 316
Joined: Thu Sep 15, 2016 5:23 pm

Re: WHB04B-4 Pendant Plugin

Postby thegreatwaldo » Tue Oct 20, 2020 6:48 pm

thegreatwaldo wrote:Paul
Try plugging the transmitter into another usb port and maybe using the the current official release version or the latest test version.
I meant to say reciever!! Not transmitter.
Cheers.
Andrew
Cheers
Andrew
thegreatwaldo
 
Posts: 138
Joined: Tue Sep 06, 2016 8:28 pm

Re: WHB04B-4 Pendant Plugin

Postby Delco » Wed Oct 21, 2020 2:47 am

Checked all the functions on the wired WHB04B pendant and they all work as expected , the only thing I have been unable to work out is how to get the macro buttons setup ? on the earlier plugin there was a setup configuration page , on this new plugin there is not that option that I have found ??? Anyone know how to get it to work ?
Delco
 
Posts: 113
Joined: Tue Apr 02, 2019 4:23 am

PreviousNext

Return to Plugins

Who is online

Users browsing this forum: No registered users and 2 guests