Any chance someone would create a XHC-WHB04b-4 plugin?

This is where you talk about Plugins. How they are made and how they work, show examples.

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby cncdrive » Fri Jul 19, 2019 1:25 am

No, the mach3 plugin is not any help and the manufacturer's API file is also a garbage (unreliable), so developing such plugin starts with analysing the USB trafic and understanding it and then to write an own HID control code.
It is basically a work like building an Enigma machine. :)
We've made it for the HB04, but since we have a better more featureful pendant by now (UCR201) for similar cost as those chinese pendants we support our own device instead of the chinese one.
So, I think a plugin will not be written unless if the manufacturer will write one. Or if some knowledgeable users will write one.

Another reason why we will not write a plugin is because as I said it is lots of work and these kind of manufacturers simply dumping/discontinueing their old products when they develop a new one, so this could become an endless development cycle for us if we always want to support all new chinese pendants.
cncdrive
Site Admin
 
Posts: 3141
Joined: Tue Aug 12, 2014 11:17 pm

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby wright » Fri Jul 19, 2019 7:20 am

Thanks for the reply, that is a pity as the wireless Pendant has many more features than either of the alternatives.

John
wright
 
Posts: 5
Joined: Sat Jul 13, 2019 3:13 pm

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby cncdrive » Fri Jul 19, 2019 9:12 am

No, the UCR201 is also a wireless pendant and has more features than the WHB04B-04. :)
cncdrive
Site Admin
 
Posts: 3141
Joined: Tue Aug 12, 2014 11:17 pm

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby Willy » Thu Sep 19, 2019 8:51 pm

Oh that's a real shame this doesn't work I have one of these as well :-( I guess I could try and sell it.
Willy
 
Posts: 3
Joined: Sat Aug 17, 2019 9:02 pm

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby ger21 » Thu Sep 19, 2019 10:09 pm

Everyone that owns one should be emailing XHC every day.
It's their pendant, they should support it (and their customers).
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1669
Joined: Sat Sep 03, 2016 2:17 am

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby beefy » Fri Sep 20, 2019 11:38 am

I always feel a lot safer when the same company manufactures the product AND writes the software for it.

This is exactly what Cncdrive is doing and thus they have total control of everything.
beefy
 
Posts: 347
Joined: Mon Sep 05, 2016 10:34 am

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby vedecoid » Sat Oct 19, 2019 9:41 am

I can relate to the position of CNCDrive to not invest their time and money into developing such driver. They are absolutely right in that. However, what I don't understand is that they are not making the source code for the existing plugin available for someone else to start from. UCCNC is a fantastic piece of software in itself, but part of the appeal for me was the ability to write plugins in C# which I'm very familiar with. The mleast that should be available is source code for the existing plugins. For this HD04B-X, the difficult part is not the HID sniffing and figuring out of the protocol used for someone with the right experience and the right tools. HID is a very simple protocol. This info is by the way already available on github and in various forums provided by folks who wrote a working LinuxCNC driver for it. What would be difficult and time consuming for someone like me with the experience of writing HID software in C# is figuring out how to integrate existing HID communication solutions that we wrote before into the UCCNC plugin framework. Hence the question again : can you please open source the existing plugin ? If that isn't possible, I can only conclude that this is rather based on an attempt to make the purchase of the CNCDrive pendant the only viable option for your customers. I'm sure though that that is not the case.
vedecoid
 
Posts: 1
Joined: Sat Oct 19, 2019 9:24 am

Re: Any chance someone would create a XHC-WHB04b-4 plugin?

Postby cncdrive » Wed Oct 23, 2019 3:06 am

Any wired pendants can be made work with the UCCNC. So, that the only viable solution is our pendant is absolutely incorrect.
If we talking about wireless pendants, then yes, we support our own pendant the UCR201, which is much more power efficient (longer battery life), has faster LCD updates, has longer transmit range than any of those chinese pendants and has similar pricing as the chinese wireless pendants.

HID is not UCCNC specific and also the communication with chinese pendants is not UCCNC specific.
Only the UCCNC function calls are UCCNC specific which function prototypes are all available in Visual Studio Intellisense when loading the plugininterface.dll into a project.
The UCR201 plugin also contains firmware codes and update routines which is why we do not share the source code.
The XHC-HB04 chinese pendant plugin was lots of work for us and we do not want to help concurent software developers with sharing the source code, they should take their time just like we did if they want to make that pendant properly work with their softwares.
cncdrive
Site Admin
 
Posts: 3141
Joined: Tue Aug 12, 2014 11:17 pm

Previous

Return to Plugins

Who is online

Users browsing this forum: No registered users and 1 guest