uc300 expert with onboard modbus
Posted:
Sun Jan 02, 2022 12:26 pmby Battwell
wish list
uc300 with onboard modbus for nice cabinet/machine wiring
uc300 with analog servo control
Re: uc300 expert with onboard modbus
Posted:
Sun Jan 02, 2022 2:40 pmby Robertspark
a turning application would be nice...
Re: uc300 expert with onboard modbus
Posted:
Sat Jan 15, 2022 8:58 pmby cncdrive
This would require extra hardware, because rs485 is fullduplex on all VFDs I've seen so far.
This means that the transmit and reception are done on the same 2 wires. The master has to do the direction change.
So this would require an rs485 fullduplex hardware, the uc300eth does not have that onboard.