uc300 with onboard modbus for nice cabinet/machine wiring
uc300 with analog servo control
uc300 expert with onboard modbus
3 posts
• Page 1 of 1
uc300 expert with onboard modbus
by Battwell » Sun Jan 02, 2022 12:26 pm
wish list
uc300 with onboard modbus for nice cabinet/machine wiring
uc300 with analog servo control
uc300 with onboard modbus for nice cabinet/machine wiring
uc300 with analog servo control
Uc300eth on router and mill.
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
- Battwell
- Posts: 831
- Joined: Sun Sep 25, 2016 7:39 pm
- Location: South Wales. Uk
Re: uc300 expert with onboard modbus
by Robertspark » Sun Jan 02, 2022 2:40 pm
a turning application would be nice...
UCCNC Macro Manual v1.2113 - https://drive.google.com/drive/folders/ ... sp=sharing
- Robertspark
- Posts: 1892
- Joined: Sat Sep 03, 2016 4:27 pm
Re: uc300 expert with onboard modbus
by cncdrive » Sat Jan 15, 2022 8:58 pm
This would require extra hardware, because rs485 is fullduplex on all VFDs I've seen so far.
This means that the transmit and reception are done on the same 2 wires. The master has to do the direction change.
So this would require an rs485 fullduplex hardware, the uc300eth does not have that onboard.
This means that the transmit and reception are done on the same 2 wires. The master has to do the direction change.
So this would require an rs485 fullduplex hardware, the uc300eth does not have that onboard.
- cncdrive
- Site Admin
- Posts: 4727
- Joined: Tue Aug 12, 2014 11:17 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests