NewTool DRO
Posted: Mon Aug 05, 2019 1:55 pmCould we please have a DRO for NewTool(). There is a DRO for CurrentTool but I do not see one for NewTool.
(;-) TP
(;-) TP
forum.cncdrive.com
UCCNC machine control software support forum
http://www.forum.cncdrive.com/
NewTool DRO
Page 1 of 1
Posted: Mon Aug 05, 2019 1:55 pmRe: NewTool DRO
Posted: Mon Aug 05, 2019 2:03 pmDo you mean a DRO which the T word changes and can be used to preload the next tool?
Re: NewTool DRO
Posted: Mon Aug 05, 2019 2:05 pmYes that would be correct.
(;-) TP
(;-) TP
Re: NewTool DRO
Posted: Mon Aug 05, 2019 2:20 pmYes, Balázs has already made it. You'll find it in the next test release.
Re: NewTool DRO
Posted: Mon Aug 05, 2019 4:07 pmYes, it is already in the planned next test release.
Terry, if you check the printscreens I've sent you a few days ago you will notice the Tool and the T DROs on the screen.
Terry, if you check the printscreens I've sent you a few days ago you will notice the Tool and the T DROs on the screen.
Re: NewTool DRO
Posted: Mon Aug 05, 2019 7:58 pmThank You both 
(;-) TP
(;-) TP